BYK-Gardner GmbH
Hardware | 2
301 200 141 E 2010
wave-scan 3 ROBOTIC
11
During the measurement, a distance of
15 mm ± 2 mm
to the surface is to
be kept.
The angle-deviation of the perpendiculars on the surface can amount to
at
most 2°
to all sides.
NOTICE
The mounting can be done on the left or on the right side of the measure-
ment unit. The protruding element on the side not used can be screwed off
(two small screws).
2.3 Power Supply
The instrument is supplied by an external AC / DC power adapter, which is
not part of the delivery.
1
2
Illustration 4:
Interface connectors of wave-scan 3 ROBOTIC
1 Power supply is provided via a black 8-pole plug.
2 Data transmission is provided via a green 4-pole plug.
In order to connect the measuring instrument, first check the wiring and
the matching of the power supply. Subsequently you plug in the black plug
and switch on power.
