BYK-Gardner GmbH
Checking | 5
301 200 141 E 2010
wave-scan 3 ROBOTIC
25
5 Checking
Due to the underlying measurement principle, no calibration of the instru-
ment is required.
5.1 Principle
It is recommended, however, to check the functionality of the instrument
at regular intervals (about once every 3 months).
Illustration 24:
Instrument and checking tile
The reference tile included with delivery is provided for this purpose.
5.2 Mounting
Mount the test tile near the robot at the position intended for the instru-
ment test. The robot is to be programmed to reach the checking tile.
1
2
3
4
Illustration 25:
Mounting of checking tile
1 Robot arm with rotable adapter
2 Instrument on rotable adapter
3 Car body / part in robot cell
4 Checking tile mounted to wall
