3 | Getting Started
BYK-Gardner GmbH
16
byko-swing
302 500 060 E 2207
3.4 Powering the Instrument
To switch the instrument on:
1. Check the connection of the power supply on the back site.
2. Switch the instrument on via button
Power
.
3. The status LED lights up green.
To switch the instrument off:
1. Check if the status LED lights up green.
2. If status LED is blue, use button
Enter
to confirm.
3. If status LED is red, use button
Start/Stop
to abort.
4. Switch the instrument off via button
Power
.
The instrument switches off automatically after 1 hour of inactivity. If the instru-
ment is switched on again, the latest settings and results are restored.
NOTICE
In the measuring mode a fully automatic sequence is carried out. Keep the door
closed.
