12
Power supply
3. Power supply
Before operating the instrument for the first time,
please read the operating instructions and pay
attention to the safety instructions in Chapter 1.
Unpack the device and check to make certain all
pieces have been included with delivery (for scope
of delivery, see Section Delivery notes).
3.1 Power supply battery-operated
The battery must be placed in the measuring unit
for operation service. The device runs on four AA
1.5-V alkaline or 1.2-V NiMH rechargeable battery.
Use only alkaline batteries or NiMH
rechargeables (AA /LR6)!
Depending on the exact brand and the settings
of the instrument, the capacity of each battery is
sufficient for about 8000 measurements. When the
battery voltage falls below the required minimum
voltage in the course of operation, the following
message appears on the display
Battery empty!
To ensure that the unit is always ready for
operation, it is recommended to have spare
batteries handy, especially when performing
measurements in the field.
Summary of Contents for BYK spectro-guide 45/0 gloss
Page 58: ...57 Setting Custom1 Setting Custom2 Options...
Page 74: ...250 020 858 E 1105...
