28
Multiple readings
In the default setting, the difference mode is
shown on the display. When multiple readings are
performed, the mean value is shown on the left
and the differences of the mean are shown on the
right.
If you like to see the current value, you can select
the “Sample Mode” option from the “Display”
menu. To do this, use the
buttons to place the cursor on the “Display” menu.
Then use the
button to open the submenu. “Sample Mode” is
preselected.
Press the Operate button. The display will change
to show the current value on the left side, while the
right side displays the mean for the measurements
taken so far.
In order to turn off the calculation of the mean, use
the Operate button to confirm the “Off” option on
the “File/Mean/Off” menu.
Summary of Contents for BYK spectro-guide 45/0 gloss
Page 58: ...57 Setting Custom1 Setting Custom2 Options...
Page 74: ...250 020 858 E 1105...
