45
10.6 Setup
10.6.1 Auto store
When the “AutoStore” function is activated, the
sample or standard is automatically stored after
each measurement. This function can be toggled
on and off. It is possible to assign a seven-digit
name and a three-digit starting number.
The number is automatically incremented by 1 on
each storing operation. The starting number and
name can be changed, even when AutoStore is
activated.
From the “Option” menu, use the
button to move the cursor to the “Setup” option.
The submenu will open when you press the
Operate button. “AutoStore” is preselected.
Confirm with the Operate button.
AutoStore On
(or off) appears on the display. The sample name
is assigned at the time of the first measurement.
The last name entered always appears as a
default. It can be changed each time the data is
stored.
To end the input operation without storing, use the
buttons to exit the input field.
Options
Summary of Contents for BYK spectro-guide 45/0 gloss
Page 58: ...57 Setting Custom1 Setting Custom2 Options...
Page 74: ...250 020 858 E 1105...
