47
10.6.3 Metamerism index limit
From the “Options” menu, use the
button to move the cursor to the “Setup” option.
The submenu opens when you press the Operate
button.
Move the cursor to the “MI Limit” option and press
the Operate button. The input menu for the MI limit
appears. Use the
buttons to change the underlined digit. Use the
button to move the underline to the next digit.
End the input operation by pressing the Operate
button. The instrument returns to the measuring
mode.
To end the input without storing, use the
buttons to exit the input field.
The metamerism index is now calculated for
each difference measurement. If it is greater than
the selected limit, a reverse “M” appears on the
display. To switch off the calculation, the limit must
be reset to 0.00.
Options
Summary of Contents for BYK spectro-guide 45/0 gloss
Page 58: ...57 Setting Custom1 Setting Custom2 Options...
Page 74: ...250 020 858 E 1105...
