ALTEC AIR, LLC
P1500W Series Air Dryers User’s Guide
Page 46 of 101
P011787 – Rev. R
8.9 Connecting to Power Fail Alarm Terminals
8.9.1
Open Panel (see section
Error! Reference source not found.
).
8.9.2
Locate the external Power
Fail pins on the Control
Board.
8.9.3
Wire the Power Fail
Alarm wire pair to the
Control Board as required:
PWR FAIL
&
NO
for
CLOSE ON ALARM operation.
NC
&
PWR FAIL
for OPEN ON ALARM operation
8.9.4
Close Panel.
8.10 Connecting via Web Browser
If the Air Dryer IS connected to an IP network:
The Air Dryer must be configured with a valid IP Address, Subnet Mask, and
Gateway Address for the network.
An IP cable is connecting the Air Dryer to the network.
Use a computer that is on the same network as the air Dryer.
Use Internet Explorer (6.0 or newer) or Mozilla Firefox Web Browser.
If the Air Dryer IS NOT connected to an IP network and has not been
configured with IP information:
Use the default IP Address (
192.168.1.102)
of the air dryer to connect.
Summary of Contents for PUREGAS P1500W Series
Page 2: ......
