background image

User Manual ID Drive  1.2 

8

7. Supported storage media

SanDisk Type II ATA PC Cards

Storage capacities:16 MByte – 2.0 GByte*

SanDisk CompactFlash memory cards Type I and Type II (use an appropriate PC

Card adapter); Microdrives miniature hard disks (use a CF Type II PC Card adap-

ter). Storage capacities :CF Type I 16 – 1.0 GByte*

SmartMedia memory cards (use an appropriate PC Card adapter)

Storage capacities :8 – 128 MByte*

SanDisk MultiMediaCards (use the altec SD Card & MultiMediaCard Adapter)

Storage capacities:16 – 128 MByte*

SanDisk SD Cards (use the altec SD Card & MultiMediaCard Adapter)

Storage capacities :16 – 256 MByte*

SanDisk Memory Stick (use an appropriate PC Card adapter)

Storage capacities :16 – 128 MByte*

altec Full Metal Cards Solid (ATA PC Card Type II) 

Storage capacities :16 MByte – 2.0 GByte*

altec Full Metal Cards IP54 (ATA PC Card Type II)

protected against spray water and dust, industrial temperature range:

Operation:–40°C to +85°C; 5 V

Storage capacities :32 MByte – 2.0 GByte*

altec Full Metal Cards IP68 (ATA PC Card Type II)

can be immersed in water, industrial temperature range:

Operation:–40°C to +85°C; 5 V

Storage capacities :32 MByte – 2.0 GByte*

altec Full Metal Cards Hermetic Military (ATA PC Card Type II)

suitable for space applications, meets military standard vacuum, vibration and

shock tests, corrosion protection and resistant to all types of fungus, protected

against spray water and dust, industrial temperature range:

Operation :–40°C to +85°C; 5 V

Storage capacities :32 MByte – 2.0 GByte*                                          * 

As of 03/2003

Ask for our product overview »Pocket Guide« or visit our web site for information on

the full range of memory media, drives, Solid State Disks and CopyStations which are

available from altec:

http://www.altec-computersysteme.com

Summary of Contents for ID Drive









Reviews: