User Guide USB Stick CopyStation
21
– 1.3
7
User Guide USB Stick CopyStation
21
– 1.3
6
3. Starting the software and logging in
3.1 Starting the software
After the first start of the program "
usbcopy21.exe
" you have to select
German or English as the user interface language (see figure left). This
can be changed later (see page 17).
After every start of the program, you have to accept the license agree-
ment by clicking "OK".
3.2 User log in
After accepting the licensing agreement you will
be shown the login dialog box (see figure). The
default user name and password to log in as the
administrator is
admin
and
admin
.
The default user name and password to log in as
a normal user is
user
and
user
.
In this case you
are only given limited rights to the program func-
tions. You can only open and run existing copy
jobs.
After successful user login the following program window appears (see figure on the
next page).
2. Installing the USB Stick CopyStation
21
2.1 Installing the hardware
Install the USB 2.0 PCI card in your PC as described in the supplied hardware installa-
tion guide. If you are using Windows XP you do not need to install any drivers.
Then plug the three
coloured USB cables into
the corresponding sock-
ets on the USB 2.0 PCI
card (see figure on the
left).
Connect the USB Stick
CopyStation
21
to a power
outlet socket with the
supplied power cable (see
arrow in the figure on the
left).
2.2 Installing the software
Copy the USB-Copy program folder
from the software CD
to your computer hard disk
.
You can freely select the target directory.
In order to start the USB Stick CopyStation program, double-click the "
usbcopy21.exe
"
file in the program folder.
You need to have administrative rights to run the program properly.
