Page-3
Page-2
Step 2
Remove retaining nut from Padlock Latch and install into enclosure door.
Orientate the latch as shown. Secure Padlock latch with retaining nut.
Front of Enclosure Door
Inside of Enclosure Door
Step 1
Remove the existing latch by first removing the lock cam. Then the
retaining nut can be removed.
Do not discard the nylon washer, it will be reused.
NFC Series FRP Enclosure Installation
Remove Retaining Nut
Nylon Washer
Step 2
Remove retaining nut from Padlock Latch and install into enclosure door.
Orientate the latch as shown. Replace the nylon washer and secure
Padlock latch with retaining nut.
Remove Lock Cam
Front of Enclosure Door
Inside of Enclosure Door
Step 3
Once Padlock Latch is secured, remove the lock cam which is for use with
the NS series enclosures only. This will be replaced with the second lock
cam included in the bag.
Step 4
Install the NFC enclosure lock cam as shown.
Remove NS Enclosure Lock Cam
Install NFC Enclosure Lock Cam
Once installed, test Padlock Latch to ensure proper operation.
Once installed, test Padlock Latch to ensure proper operation.
HN-0006 Installation Guide
HN-0006 Installation Guide
