TAEC Solar Box
Owner’s Manual
v2.2
6
The Solar Panel is a roll-bond type plate manufactured in double channel pressed aluminium,
with a post-press anodization-oxidation that creates a dark tone aspect.
The panel must be installed in landscape position as shown, with its 2000mm
length horizontal and the 800mm side vertical.
The panel must not be mounted flat. It must be on an angle greater than 10° to
ensure separation between the vapour from the liquid.
The pipe connections must be facing down, with the liquid line at the bottom.
Panels can be supplied as left or
right, according to side of the panel
the connections are located, with
the pipes pointing down the roof.
Left Panel
Right Panel
1.7.
Dimensions
1.8.
Solar Panel
