Micro VoIP 200
User Manual
v1.53
14
Figure 3 the relationship of call group and pickup group
As shown in Figure3, IP Phone #103 belongs to call group #1 and #2, suppose that its
pickup group is #1, and then it can only pickup the calls of #101, #102 and #104. And suppose
that IP Phone #101 has pickup groups #1 and #2, and then it can pickup calls of every IP Phones
in this figure.
11.
Call Type
: Micro VoIP 200 will automatically detect whether the IP Phone is registered from
this office (displayed “local”) or from another office (displayed “remote”).
12.
IP:Port
: this field will show the IP address and port number of the registered IP Phone.
13.
APS
: the field when set to “YES” will enable the auto-provisioning (auto-installation) of this
specific IP Phone, the Micro VoIP 200 will give the user accounts to the specific IP Phone
(identified by the MAC address), and thus the IP Phones could be installed without any
configuration.
14.
VMWI (new/old)
: the number of new and old voice mails of this extension IP Phone.
The following sections will detail the possible installation methods (manually or automatically)
of Micro VoIP 200 and IP Phones step by step:
