Micro VoIP 200
User Manual
v1.53
17
2.2.2 Install IP-Phone Manually
Other than the automatic installation of IP Phones, you could also install IP Phone manually. The
manual installation steps for IP Phone and Micro VoIP 200 are detailed in the followings:
IP-Phone settings
:
On the IP Phone, you need to at least set the user account and proxy server address to let the IP
Phone register to the Micro VoIP 200 manually. Suppose that your IP-Phone is with
number/password as 101/101, and then just fill in this account into the IP Phone. The default IP
address of Micro VoIP 200 is 192.168.1.1, so, just key in this IP address as the proxy server
address field in the IP Phone. The IP-Phone network type is better set to be DHCP type.
Micro VoIP 200 settings
:
On the Micro VoIP 200, you need to add this user account to allow the IP Phone to register into
it. By clicking the
Edit
button on the 001 row, the following page will pop-up. The MAC
address field is needed if the IP Phone wants to get IP address from Micro VoIP 200 by DHCP.
