Scaler Switcher with Digital Amplifier-TN (12 inputs)
Altimium 6 www.altimium.com
Step3.
Connect a microphone to the MIC input port; plug an audio source device or a
wireless microphone to the LINE port.
Step4.
Connect a control device (e.g. a PC) to the TCP/IP ports or RS232 sockets of
SCA121DTN. Send commands to control SCA121DTN via control software.
Step5.
Connect the HDMI HDBT port of SCA121DTN with HDMI twisted pair
Receiver with PoC to extend the signal.
Step6.
Connect display devices to video output ports; connect earphones/amplifiers to
audio output ports. (Abiding by the color instruction on output sockets)
Step7.
Connect the output ports of amplifiers to stereo
equipment’s.
Step8.
Plug the power cable of the switcher to an AC100V~240V power supply, HDMI
twisted pair Receiver with PoC is able to get energized with PoC solution.
3.4. PoC Solution
HDBT port supports PoC, which allows SCA121DTN and HDMI twisted pair Receiver
with PoC share the same power supply and eliminates the need for extra power supply
at the remote nodes.
Connect SCA121DTN with HDMI twisted pair Receiver with PoC via a CAT5e/6 cable,
then plug the power cable of the switcher to an AC100V~240V power supply, HDMI
twisted pair Receiver with PoC can be energized synchronously with PoC solution, see
the picture below:
Note:
To activate PoC solution, all related parts (including the devices to share the same
power supply and connecting cable) should support PoC.
CA
T5
e 6
0m
HDMI Twisted Pair Receiver
with PoC
Sc
ale
r S
wi
tch
er
wi
th
Di
git
al
Am
pli
fie
r-T
N
100-240V AC