Scaler Switcher with Digital Amplifier-TN (12 inputs)
Altimium 17 www.altimium.com
Controlled by PC(s) in LAN
SCA121DTN can be connected with a router to make up a LAN with the PC(s), this
make it able to be controlled in a LAN. Make sure SCA121DTN
’s IP section is the same
with the router. Please connect like the following figure for LAN control.
Step1.
Connect the TCP/IP port of SCA121DTN to Ethernet port of PC with twisted
pair.
Step2.
Set the PC
’s IP address and gateway to the same IP section as SCA121DTN’s.
Do remember the PC
’s original IP address and gateway.
Step3.
Set SCA121DTN
’s IP address and gateway to the same IP section as the
router
’s.
Same IP section
but cannot be
192.168.0.178