Scaler Switcher with Digital Amplifier-TN (12 inputs)
Altimium 3 www.altimium.com
2. Panel Description
2.1. Front Panel
①
Power indicating LED. It will illuminate red when the unit is connected with power.
②
IR sensor, receive signals sent from of IR remote.
③
Video source selection buttons. You can select video/audio sources by pressing
these buttons. And VIDEO source includes three different signals: YPbPr, C-Video
and S-Video.
④
Signal channel selection buttons, 4 in total, correspond to the 4 input sources
separately.
⑤
Resolution selection buttons. These including
1024×768, 1280x720p, 1280×800,
1360×768, 1920×1080p.
⑥
MIC volume control buttons.
“MUTE” for mute MIC volume, “
△
”for MIC volume up,
“
▽
”for MIC volume down, loop controlling.
⑦
Line volume control buttons.
“MUTE” for muting line volume, “
△
”for line volume up,
“
▽
”for line volume down
.
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
2.2. Rear Panel
①
Two RCA connectors for stereo audio output;
One VGA output;
One HDMI output with audio embedded;
One HDBT port for HDMI extending (works with
H
DMI twisted pair Receiver),
support PoC.
②
Four VGA connectors for VGA inputs.
