Altinex 8-out Video/Sync Output Cards VM2144VS, User Manual

                                                                   V-MATRIX

11

INSTALLING YOUR V-MATRIX™
VIDEO/SYNC

OUTPUT

CARDS

6

Step 1.  

Slide the 

VM2144VS/ VM2145SS/

VM2146UX

 and the 

VM2143VS

 into

available slots in the V-Matrix™
Enclosure. Make sure that the cards fit
into place. Secure the card to the V-
Matrix™ by tightening the retainer screws
located on the top and bottom of each
cover plate.

Step 2.

Connect an output cable from the signal
source to the input connector of the

VM2143VS

. Connect the output

connector of the 

VM2144VS/ VM2145SS/

VM2146UX

 to the display devices through

an input cable.

Note:

To set jumpers for 

VM2145SS

, see page

6 and 7 for more information. To set
jumpers for 

VM2146UX

, see page 8, 9,

and 10.

OPERATION

7

The 

VM2144VS/ VM2145SS/ VM2146UX

 will

operate successfully as long as the card is installed
properly and other technical specifications are
followed.

TROUBLESHOOTING GUIDE

8

We have carefully tested and have found no
problems in the supplied 

VM2144VS/VM2145SS/

VM2146UX

; however, we would like to offer

suggestions for the following:

Make sure that power is connected to the
enclosure and also check to see if the 

VM2144VS/

VM2145SS/VM2146UX

 is pushed in all the way.

Make sure that you have signal sources connected
to compatible displays.

If the image quality is poor, please make sure that
a high quality of cables is used. We recommend
ALTINEX-made cables for best results.

If there is problem with the 

VM2144VS/

VM2145SS/VM2146UX

 please call ALTINEX at

(714) 990-2300.