background image

MULTITASKER

400-0371-004

3

ABOUT YOUR MT107-203

2

MT107-203

8-In, Twisted Pair, Single Channel

The 

MT107-203

is an 8 Input expansion card for 

use with the MT107-104 64X64 Matrix Engine

®

The 

MT107-203

is capable of receiving ALTINEX

Twisted Pair Standard signals from transmitters 
such as the DA1930CT. The Twisted Pair signals 
from the transmitter may be easily distributed to the 
single channel inputs using ALTINEX cables such 
as the MS8704TP.

Each 

MT107-203

connects to the Input Connector 

on the MT107-104 Matrix Engine. Up to 8

MT107-203

cards may be connected to the engine. 

Each card is connected with the engine via 
specially provided, high-bandwidth video cables.

As part of the MT107-104 Matrix Engine, the 

MT107-203

has special built-in features. Signal 

detection circuitry allows the user to determine the 
presence of an input signal on any channel.

Video input signals are buffered to the matrix 
system through high-bandwidth differential 
receivers.

ALTINEX's software and hardware allow for the 
switching of any input to output combination and 
prevents illegal switching combinations that may 
damage components.

The latest generation of Twisted Pair devices uses 
an innovative, patented technology* developed by 
ALTINEX. The new signal processing technology 
allows transmitting and receiving fully equalized 
computer video signals, stereo, and audio signals 
over long distances. The maximum distance at full 
UXGA resolution is 400 ft (122 m) between devices 
and may reach up to 750 ft (230 m) at VGA 
resolution.

TECHNICAL SPECIFICATIONS

3

Specifications are subject to change.
See 

www.altinex.com

for up-to-date information.

FEATURES/
DESCRIPTION

MT107-203

GENERAL

Input Connectors

8

Twisted Pair Input

RJ-45 female

Output Connectors

1

Twisted Pair to Engine

Internal Box Header

Compatibility

Signal Types

ALTINEX Twisted Pair

Standard

Signal Resolution

VGA through UXGA, 

C-Video, S-Video, Stereo 

Audio

Table 1. 

MT107-203

General

MECHANICAL

MT107-203

Enclosure Slots Required

1

Weight

0.4 lb (0.18 kg)

Connector Panel

Black Anodized

T° Operating

10°C-50°C

T° Maximum

75°C

Humidity

90% non-condensing

MTBF (calc.)

38,000 hrs

Table 2. 

MT107-203

Mechanical

ELECTRICAL

MT107-203

Input

Twisted Pair

Video/Sync/Audio Signals

ALTINEX Standard

Analog Signal Level

1.5 Vp-p max.

Output

Bus to Matrix Engine

0 dB gain

Bandwidth

Bandwidth

300 MHz @ -3dB

Power

(from enclosure)

+6V

0.110 A (0.7 W)

 -6V

0.110 A (0.7 W)

Table 3. 

MT107-203

Electrical

* US Patent 7,065,190

Summary of Contents for MULTITASKER MT107-203










Reviews: