CB300-101
User’s Guide
400-0619-001
8
Updating Firmware:
1. Download and install the firmware update from
2. Connect ShareTime to a PC using USB Type A to Micro USB. Once
connected, the LED turns a solid color and then briefly turns off. The
CB300-101 then flashes the appropriate number of times corresponding
with a color to notify the user what version they currently have.
4
5
6
7
8
Blue
Yellow
Pink
Cyan
Green
After this notification, the LED again briefly turns off and then becomes a
solid color depending on the current firmware loaded. When the LED is a
solid color, launch the update application.
3. Select Program from the menu to run the application.
4. After the update is complete, the LED flashes blue once more to indicate
the NEW version number.
5. Disconnect the USB cable from the CB300-101 and remove from the source, if connected. Wait 3 seconds and reconnect to
the HMDI source.
6. ShareTime is now ready with new firmware.
