background image

1

AFS-700 LED Follow Spot

INSTALLATION INSTRUCTIONS / INSTRUCTIONS D’INSTALLATION

PREFACE

About These Instructions

The document provides basic information on installation and operational instructions for a qualified,
trained installer.These instructions provide information for the following product:
• AFS-700 LED Follow Spot

Note:  

Additional product information can be found on our web site at 

www.altmanlighting.com

 or 

by scanning the QR code to the right.

Please  read  all  instructions  before  installing  or  using  this  product. 

Retain these instructions for

future reference

Have a question regarding these instructions?

The  material  in  this  document  is  for  information  purposes  only  and  is  subject  to  change  without
notice. Altman Lighting assumes no responsibility for any errors or omissions which may appear in
this document. Should you find an error, have a suggestion or question regarding your Altman Lighting product, we would love to hear
from you. 
You can reach us at:

Altman Lighting
57 Alexander Street
Yonkers, New York 10701
1.914.476.7987 (Main)
1.914.963.7304 (Fax)
www.altmanlighting.com
customerservice@altmanlighting.com

Note:  

Information contained in this document may not be duplicated in full or in part by any person without prior written approval of 

Altman Lighting. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this 
document for all other purposes is specifically prohibited.

Our Commitment

Altman  Lighting  continually  engages  in  research  related  to  product  improvement.  New  materials,  production  methods  and  design

 

refinements are introduced into existing products without notice as a routine expression of the philosophy. For this reason any current

 

Altman Lighting product may differ in some respect from its published description, but will always equal or exceed the original design

 

specifications unless otherwise noted.

Version as of: 

28 September 2019

AFS-700 LED Follow Spot INSTALLATION INSTRUCTIONS / INSTRUCTIONS D’INSTALLATION

©2019 Altman Lighting. All rights reserved.

CLEANING AND CARE

WARNING!  

All cleaning should be performed with power completely removed from the luminaire. Never remove protective covers 

when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the fixture. All service and maintenance, 
other than described herein, should be performed by a qualified technician or Authorized Service Center. AT NO TIME SHOULD THE 
LED BE TOUCHED. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a 
similar qualified person.

WARNING!  

Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or near the AFS-

700 LED Follow Spot. These types of cleaners or solvents can permanently damage the optics or housings of the fixture.

For all other service and maintenance issues, please contact your local Altman Lighting office or an Authorized Service Center.

WARNING!  

Disassembly (other than as described herein), alterations, unauthorized service, etc. will void the product warranty. 

Contact your local Altman Lighting office or an Authorized Service Center for technical support and service.

Scan QR code to go to
the AFS-700 LED Follow
Spot web page.

Summary of Contents for AFS-700















Reviews: