Alto-Shaam CombiTouch 7.14es Installation Manual Download

Page: 38 / 39

COMbIThERM® ES SERIES

•

ELECTRIC

INSTALLATION MANUAL #MN-28897 •

36.

o r i g i n a l e q u i p m e n t l i m i t e d w a r r a n t y

Alto-Shaam, Inc. warrants to the original purchaser that any original part that is found to be defective in

material or workmanship will, at Alto-Shaam’s option, subject to provisions hereinafter stated, be replaced with

a new or rebuilt part.

The labor warranty remains in effect one (1) year from installation or fifteen (15) months from the shipping date,

whichever occurs first. Alto-Shaam will bear normal labor charges performed by an authorized Alto-Shaam service

agent during standard business hours, and excluding overtime, holiday rates or any additional fees.

The parts warranty remains in effect for one (1) year from installation or fifteen (15) months from the shipping

date, whichever occurs first.

THIS WARRANTY DOES NOT APPLY TO:

1. Replacement of light bulbs, door gaskets, and/or the replacement of glass due to damage of any kind.

2. Equipment damage caused by accident, shipping, improper installation or alteration.

3. Steam generator or steam generating system damage as a result of inadequate routine maintenance and

cleaning. Required maintenance and cleaning of steam generating equipment is the responsibility of the

owner/operator.

4. Equipment used under conditions of abuse, misuse, carelessness or abnormal conditions including, but not

limited to, equipment subjected to harsh or inappropriate chemicals including, but not limited to, compounds

containing chlorine, chlorides or quaternary salts, or equipment with missing or altered serial numbers.

5. Equipment that uses water must meet Alto-Shaam’s minimum water quality standards as shown below.

USE OF WATER NOT MEETING ALTO-SHAAM’S MINIMUM WATER QUALITY STANDARDS WILL VOID

THIS WARRANTY.

Water quality and required maintenance of steam generating equipment is the responsibility of the

owner/operator. The installation and use of Alto-Shaam’s CombiGuard™ Water Filtration System is

highly recommended.

6. Damage caused by use of any cleaning agent other than Alto-Shaam’s Combitherm

Oven Cleaner including,

but not limited to, damage due to chlorine, bleach, quaternary salts, scouring powders or other harmful

chemicals. Use of Alto-Shaam’s Combitherm Cleaner on Combitherm ovens is highly recommended.

7. Any losses or damage resulting from malfunction, including loss of product, food product, revenue, or other

consequential or incidental damages of any kind.

8. Equipment modified in any manner from original model, substitution of parts other than factory authorized

parts, removal of any parts including legs, or addition of any parts.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL ALTO-SHAAM BE LIABLE FOR LOSS OF USE, LOSS OF REVENUE OR PROFIT, OR LOSS OF

PRODUCT, OR FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

No person except an officer of Alto-Shaam, Inc. is authorized to modify this warranty or to incur on behalf of

Alto-Shaam any other obligation or liability in connection with Alto-Shaam equipment.

Warranty

effective

November

2011

ALTO-SHAAM COMBITHERM WATER QUALITY MINIMUM STANDARDS

CONTAMINANT

INLET WATER REQUIREMENTS (

UNTREATED

WATER

)

Free Chlorine

Less than 0.1 ppm (mg\L)

Hardness

Less than 3 gpg (52 ppm)

Chloride

Less than 30 ppm (mg\L)

7.0 to 8.5

Alkalinity

Less than 50 ppm (mg\L)

Silica

Less than 12 ppm (mg\L)

Total Dissolved Solids (tds)

Less than 60 ppm

Summary of Contents for CombiTouch 7.14es








































Search results

Summary of Contents for CombiTouch 7.14es

Reviews:

Related manuals for CombiTouch 7.14es

Brands by name

Popular brands

Alto-Shaam CombiTouch 7.14es, Installation Manual

Search results

Summary of Contents for CombiTouch 7.14es

Reviews:

Related manuals for CombiTouch 7.14es

Brands by name

Popular brands