Alto-Shaam CombiTouch 7.14es Installation Manual Download | Manualshive

Page: 39 / 39

background image

t r a n s p o r t a t i o n d a m a g e a n d c l a i m s

all alto-shaam equipment is sold F.o.B. shipping point, and when accepted by the

carrier, such shipments become the property of the consignee.

should damage occur in shipment, it is a matter between the carrier and the consignee.

in such cases, the carrier is assumed to be responsible for the safe delivery of the

merchandise, unless negligence can be established on the part of the shipper.

1. Make an immediate inspection while the equipment is still in the truck or immediately after it is moved to the

receiving area. do not wait until after the material is moved to a storage area.

2. do not sign a delivery receipt or a freight bill until you have made a proper count and inspection of all

merchandise received.

3. note all damage to packages directly on the carrier’s delivery receipt.

4. Make certain the driver signs this receipt. if he refuses to sign, make a notation of this refusal on the receipt.

5. if the driver refuses to allow inspection, write the following on the delivery receipt:

Driver refuses to allow inspection of containers for visible damage.

6. Telephone the carrier’s office immediately upon finding damage, and request an inspection. Mail a written

confirmation of the time, date, and the person called.

7. save any packages and packing material for further inspection by the carrier.

8. promptly file a written claim with the carrier and attach copies of all supporting paperwork.

we will continue our policy of assisting our customers in collecting claims which have been properly filed and

actively pursued. we cannot, however, file any damage claims for you, assume the responsibility of any claims, or

accept deductions in payment for such claims.

RecoRd the model and seRial numbeR of the appliance

foR easy RefeRence. always RefeR to both model and seRial numbeR

in any contact with alto-shaam RegaRding this appliance.

model: ___________________________________________________
serial number: _____________________________________________
date installed: _____________________________________________
Voltage: __________________________________________________
purchased from: ___________________________________________

___________________________________________________

___________________________________________________

W 1 6 4 N 9 2 2 1 W a t e r S t r e e t

l

P . O . B o x 4 5 0

l

M e n o m o n e e F a l l s , W i s c o n s i n 5 3 0 5 2 - 0 4 5 0

l

U . S . A .

PHONE: 262.251.3800 • 800.558-8744

usa

/

caNada

FAX: 262.251.7067 • 800.329.8744

u

.

s

.

a

.

ONly

www.alto-shaam.com

Alto-Shaam has established a

twenty-four hour emergency service call

center to offer immediate customer access

to a local authorized service agency

outside of standard business hours. The

emergency service access is provided

exclusively for Alto-Shaam equipment

and is available throughout the United

States through the use of Alto-Shaam's

toll-free number. Emergency service

access is available seven days a week

including holidays.

«
...
37
38
39

Summary of Contents for CombiTouch 7.14es








































Reviews:

No comments

Related manuals for CombiTouch 7.14es

Brand: DeLonghi Pages: 52

Brand: Jenn-Air Pages: 96

Brand: Magic Chef Pages: 17

Brand: Diamond Pages: 13

Brand: Tasty Trotter Pages: 18

Brand: BARBAROS Pages: 26

BC 99 T P XA AUS

Brand: SCHOLTES Pages: 16

Brand: Cleveland Pages: 155

Brand: Smeg Pages: 102

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 19

Brand: Panasonic Pages: 37

Brand: Panasonic Pages: 41

Brand: Panasonic Pages: 42

Brand: Panasonic Pages: 104

Brand: Panasonic Pages: 112

Renaissance RNWO127

Brand: Dacor Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands