COMbIThERM® ES SERIES
•
ELECTRIC
INSTALLATION MANUAL #MN-28897 •
2.
c a u t i o n
Used to indicate the presence of a hazard that
can or will cause minor personal injury, property
damage, or a potential unsafe practice if the
warning included with this symbol is ignored.
c a u t i o n
Used to indicate the presence of a
hazard that can or will cause minor or
moderate personal injury or property
damage if the warning included with
this symbol is ignored.
d a n g e r
Used to indicate the presence of
a hazard that WILL cause severe
personal injury, death, or substantial
property damage if the warning
included with this symbol is ignored.
w a r n i n g
Used to indicate the presence of
a hazard that CAN cause personal
injury, possible death, or major
property damage if the warning
included with this symbol is ignored.
1. This appliance is intended to cook, hold
or process foods for the purpose of human
consumption. no other use for this appliance is
authorized or recommended.
2. This appliance is intended for use in commercial
establishments where all operators are
familiar with the purpose, limitations, and
associated hazards of this appliance. operating
instructions and warnings must be read and
understood by all operators and users.
3. any troubleshooting guides, component views,
and parts lists included in this manual are for
general reference only and are intended for use
by qualified technical personnel.
4. This manual should be considered a permanent
part of this appliance. This manual and all
supplied instructions, diagrams, schematics,
parts lists, notices, and labels must remain with
the appliance if the item is sold or moved to
another location.
n o t e :
used to notify personnel of
installation, operation, or
maintenance information that is
important but not hazard related.
safety procedures
and precautions
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. in accordance with generally accepted
product safety labeling guidelines for potential
hazards, the following signal words and symbols
may be used throughout this manual.
n o t e
For equipment delivered for use
in any location regulated by the
following directive:
dO NOt dISpOSE OF ELECtRICAL
OR ELECtRONIC EQuIpMENt WItH
OtHER MuNICIpAL WAStE.
c a u t i o n
WHEN WELdING ANy StAINLESS
StEEL COMpONENtS ON tHIS
AppLIANCE, tHE ELECtRONIC
CONtROL bOARdS MuSt bE
ISOLAtEd FROM tHE AppLIANCE.
