O P E R A T I N G I N S T R U C T I O N S
2
START-UP PROCEDURES
When the oven is powered on, the CombiTouch screen
illuminates. “Loading” indicates that the software is
booting up. The screen will also indicate what level of
progress has been made as the software becomes fully
operational. (see illustrations 1 & 2 at left)
If, for any reason, the oven is turned off or loses power
during this start-up process, the operator will be
prompted to calibrate the CombiTouch screen when the
oven is next powered up. (see illustration 3 at left)
Return to Recipe Menu - Press the red arrow if the
CombiTouch screen does not need to be calibrated.
Begin Calibration Process - Press the green
check mark if the CombiTouch screen does need to be
calibrated. The screen will switch to a grey background.
(see illustration 4 at left) A crosshairs icon will appear.
The operator should touch the center intersection.
This prompt and required action will be repeated
several times in different areas of the touchscreen.
When complete, the operator will be returned to the
recipe menu.
Illustration 1
Illustration 2
Illustration 3
Illustration 4
