background image

2

PREFACE

Dear Customer:

For our 

LTO AUDIO TEAM, music and sound are more then a job...are  first of all passion and let us  say...our obsession!

We have been designing professional audio products for a long time in cooperation with some of the major brands in 
the world in the audio field.

The 

LTO line presents unparalleled analogue and digital products made by Musicians for Musicians in our R&D Centers 

in Italy, Netherlands, United Kingdom and Taiwan. The core of our digital audio products is a sophisticated DSP (Digital 
Sound Processor) and a large range of state of the art algorithms which have been developed by our Software Team 
for the last 7 years. 

Because we are convinced you are the most important member of 

LTO AUDIO TEAM and the one confirming the quality 

of our job, we like to share with you our work and our dreams, paying attention to your suggestions and your comments.
Following this idea we create our products and we will create the new ones! From our side, we guarantee you and we will 
guarantee you also in future the best quality, the best fruits of our continuous researches and the best prices.

Thank you very much.

LTO AUDIO TEAM

Thanks for choosing 

LTO BK 2.0 Compressor/Limter/Gate and thanks for choosing one of the  results of 

LTO AUDIO 

TEAM job and researches.

Our 

LTO BK 2.0 is the result of many hours of listening and tests involving common people, area experts, musicians 

and technicians.
The results of this effort is that you can acquired an extremely efficient and universal dynamics processor. It Contains 
several new circuit design which make the unit an ultimate dyna mic processor: intelligent program recognition, interactive 
Expander/Gate and a new Dynamic Enhancer.

Nothing else to add, but that we would like to thank all the people that made the 

LTO BK 2.0 a reality available to our 

customers, and thank our designers and all the 

LTO staff, people who make possible the realization of products containing 

our idea of music and sound and are ready to support you, our customers, in the best way, conscious that you are our best 
richness.

Summary of Contents for BK 2.0



















Reviews: