9. TECHNICAL SPECIFICATIONS
22
INPUT section
Connectors
2 x COMBO
Nominal input sensitivity
0 dB (0.775 V)
Input Impedance
30kOhm, electronically balanced
Maximum Input Level
+20dBu
Input Gain
-30 / +6 dB variable in 0.5 dB steps
Output Section
Connectors
2 x XLR-M
Output Impedance
600 Ohms, electronically balanced
Nominal Output Level
0 dBu
Maximum Out put Level
+20 dBu
Output Gain
-30 / +6 dB variable in 0.5 dB steps
DSP Section
A/D converters
24 bit
D/A converters
24 bit
Internal dynamics
40 bit
Sampling frequency
48 kHz
Features
Delay Step
21 microseconds minimum
Max Delay time
2715 ms
EQ Gain
+/15dB, variable in 0.5dB steps
EQ Bandwidth
0.05 to 3.00 octaves, variable in 0.05 steps
PEQ freq
15.6 Hz to 16 kHz
-24dB, -18dB, -12dB, -6dB, CLIP relative to Clip point (+20dBu)
Communications
9-pin RS232, XLR-F RS485 IN, XLR-M RS485 OUT
General Performance
Frequency Response
20Hz - 20kHz, 0.25dB
Dynamic range
>117dB 20Hz to 20kHz
Channel Separation
>100dB 20Hz to 20kHz
Distortion (THD)
0.05%, 20Hz to 20kHz
Input Meter
Output Metering
Memories
FACTORY PRESETS are 10 + 128 USER PRESETS
General
Dimensions
Weight
Power supply
483 44 300 mm
4.0 Kg
see label on the unit
-24dB, -18dB, -12dB, -6dB, CLIP relative to Clip point (+20dBu)
GEQ freq
25 Hz to 20 kHz
