26
Note:
in the event of an incorrect password, the display prompts again, encrypting all the characters again.
To unlock the protection:
Access the
submenu.
LOCK
The display shows the prompt for entering the password to unlock the protection.
The four alphanumeric characters of the password are encrypted.
Note:
M
alongside the symbol of Total or Partial protection, the letter
may also appear. This means that the system
is protected, but the PRESET in question has undergone one or more changes that have not yet been
stored. You can however switch the system on and off without any problems, as the current settings are
kept in the buffer memory. Nevertheless, if this is your work setup, it's advisable to store it in a PRESET.
Enter in the
using the combination of the
keys and the
then press
password
and
DIAL,
ENTER.
U N L O C K
[ * * * * ]
P a s s w o r d
U N L O C K
[ B I R D ]
P a s s w o r d
5.4.4 GANGING SUBMENU
Ganging
Input Ganging
Output Ganging
This submenu allows to group together the treatment of similar inputs and/or outputs.
Similar is intended as meaning elements which have the same properties and/or the same structure.
For example, the right and left sections of a stereo system are similar, as they are made up symmetrically of the
same quantity and type of elements (the same components for High, Mid and Low frequencies).
G a n g i n g
The practical use of the Ganging function consists in the possibility of editing with identical values the parameters
of similar elements, carrying out single (instead of double) operations.
For example, it's possible to set the same Delay value or equalization on both inputs with just one operation;
or set identical Xover parameters for the various outputs fed to a stereo sound system; or yet again, enable the
LIMITER simultaneously on the two outputs dedicated to two mono stage monitors.
The system automatically recognizes incompatible elements contained in the various configurations and only
enables the Ganging function where it can effectively be used. Therefore, the Ganging function doesn't have
any effect on the MONO setups. The Ganging function can be enabled separately for both groups of input and
groups of outputs.
IMPORTANT!
,
If you can't remember the password there is an easy way for you to unlock the protection.
Turn the unit on, and almost "at the same time", press "PREV" and "
" keys. Now, the protection is unlocked.
