background image

MOD-16P

Instruments: 

1. signal generator: 8903b 

2. oscillograph: LS8106 

3. modulator: JMM-2200 

4: frequency recorder: EFC-3203A 

5. DC power supplier: 3303A. 

6. multi-meter 

7. frequency spectrum: E4403B 

Instruments Setting: 

1. signal generator: 1kHz/65mV. 

2. modulator: 

2.1. Tone set: H: Pass: 3K    L: Pass: 50K RANGE: 10 

2.2. AF set: H: Pass: 25    L: Pass: 15K RANGE: 50 

Test procedure and specification:

1. Turn on the power supply (press the ON/OFF key for 2 seconds), the LED indicator 

will light up, after the LCD show the battery and frequency status, the bright of LED 

indicator will be decreased. 

2. Test the sense power of PL2 on CH0, CH50, CH99 are above 5dBm, the sense 

power of PL1 is above 2dBm, the sense power of PL0 is above -4.5dBm, and the 

harmonics is below -45dBm. (Note: the power of PL1/PL2/PL0 must have obvious 

variation) 

3. Input signal from MIC input terminal (shout), the modulator will have output. 

4. Tone test: Tone signal is in the range of 3KHZ±0.5KHZ, the frequency is in 

31~34KHZ. 

5. In standard range test the radio frequency, and permit the error in 

±2KHZ. 

- 18 -

Summary of Contents for MOD-16H Series


































Reviews: