Stability test
On PC:
-Load file:
alfaverb_stability (APWin File menu / Open / Test )
Test Connections:
-
Output A of Audio Precision System Two --> LEFT input of the device under test.
-
LEFT output of the device under test --> A input of Audio Precision System Two
-
RIGHT output of the device under test --> B input of Audio Precision System Two
On the
Alphaverb
:
-Turn on the power switch.
-Set OUTPUT volume to maximum.
-Set INPUT volume to zero.
-Set PROGRAM to
DELAY
.
-Set MIX potentiometer to 0.
-Set VARIATION to 1.
Test:
Move the input level knob from 0 to maximum 3 times and control the output waveforms: NO
PERMANENT SINE WAVEFORMS should be visible. IF PERMANENT WAVEFORMS
WITH FREQUENCY > 20 kHz should become visible on whatever output channel, THE UNIT IS
TO BE INSPECTED.
Summary of Contents for Verb
