5
7.Phase Inversion for Low Output
This button will reverse the phase of the low frequencies output by 180 , so that, the low frequencies cancellation
in some fields can be compensated for.
This button mutes the low frequencies output.
8.Mute for Low Output
1.Input Level Control
This knob is used to adjust the input level, which can be varied from -12dB to +12dB.
2.Low Cut
Engage this button to add a 25Hz low cut filter into the input signal path.
3. Low/Low-Mid XOVER FREQ.
This knob adjusts the Low/Low-Mid crossover frequency from 44Hz to 930Hz, based on which, the Low/Low-Mid
frequencies can be output separately.
4.Low-Mid/High-Mid XOVER FREQ.
This knob adjusts the Low-Mid/High-Mid crossover frequency from 440Hz to 9.3KHz, based on which, the Low-
Mid/High-Mid frequencies can be output separately.
5.Delay Control
This knob adjusts the delay time from 0 to 2ms for the low frequencies output, which is proved to be a useful
function in the PA applications, esp. in the large size concert environment.
1 2
3
5
6 8
7
15
30 31
4
9 11
19
10
27 29
26
24
25
28
32
6.Low Output Gain Control
This control is used to attenuate or boost the low frequencies output by 6dB.
9.Low-Mid Output Gain Control
This control is used to attenuate or boost the low-middle frequencies output by 6dB.
This button will reverse the phase of the low-middle frequencies output by 180 , so that, the low-middle frequencies
cancellation in some fields can be compensated for.
11.Mute for Low-Mid Output
This button mutes the low-middle frequencies' output.
15.CD Horn
power loss of it during the long distance transmission can be compensated for.
19.High-Mid/High XOVER FREQ.
High frequencies can be output separately.
24.High-Mid Output Gain Control
This control is used to attenuate or boost the high-middle frequencies output by 6dB.
25.Phase Inversion for High-Mid Output
ncies cancellation in some fields can be compensated for.
26.Mute for High-Mid Output
This button mutes the high-middle frequencies output.
10.Phase Inversion for Low-Mid Output
27.High Output Gain Control
This control is used to attenuate or boost the high frequencies output by 6dB.
Abbreviation for 'Constant Directivity Horn', this button can be used to boost the high frequencies, so that the
This knob adjusts the High-Mid/High crossover frequency from 440Hz to 9.3KHz, based on which, the High-Mid/
This button will reverse the phase of the high-middle frequencies output by 180 , so that, the high-middle freque-
12
9
6
6
4
2
6
4
2
6
4
2
12
8
4
6
4
2
6
4
2
2
4
4
8
12
INPUT
LOW CUT
LOW-MID HIGH-MID
/
LOW DELAY
LOW OUTPUT
LOW-MID OUTPUT
HIGH-MID HIGH
/
HIGH-MID OUTPUT
HIGH OUTPUT
MONO 4-WAY
8
INPUT
DELAY
POWER
25Hz
XOVER FREQ.
XOVER FREQ.
25Hz
dB
18
OFF
6
0
MONO
LIM
LIM
LIM
STEREO
LIM
LIM
LIM
INPUT
LOW CUT
MID HIGH
/
LOW DELAY
LOW OUTPUT
MID OUTPUT
HIGH OUTPUT
INPUT
LOW CUT
LOW MID
/
HIGH
/
MID HIGH
/
LOW DELAY
LOW OUTPUT
MID OUTPUT
HIGH OUTPUT
MONO 4-WAY
STEREO
3-WAY
2
LOW LOW-MID
/
LOW MID
/
HIGH
/
STEREO 3-WAY
2-WAY
MULTIBAND LIMITER
GAIN
MUTE
GAIN
MUTE
GAIN
MUTE
CD HORN
LOW CUT
OFF
ON
OFF
ON
CHANNEL 1
OFF
ON
200
120
350
60
700
44
930
Hz
dB
Hz
7K
600
1K2
3K5
9K3
440
2K
mSec.
0.7
1.3
2
0
1
2
6
6
0
4
dB
2
6
0
4
dB
2
6
0
4
INV
dB
0
OFF
ON
200
120
350
60
700
44
930
Hz
dB
Hz
7K
600
1K2
3K5
9K3
440
2K
mSec.
0.7
1.3
2
0
1
2
6
0
4
dB
2
6
0
4
dB
2
6
0
4
dB
12
8
0
4
INPUT
DELAY
XOVER FREQ.
XOVER FREQ.
GAIN
MUTE
GAIN
MUTE
GAIN
MUTE
LOW CUT
LIMITER
THRESHOLD
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
INV
INV
INV
INV
INV
X-P234
2-WAY/3-WAY STEREO
4-WAY MONO
ACTIVE CROSSOVER
R
LTO
12
8
4
ON
OFF
2K
3K5
7K
9K3
CHANNEL 2
1K2
600
440
2K
1K2
3K5
600
7K
440
9K3
