3.Low/Mid XOVER FREQ. Control
4.Mid/High XOVER FREQ.
frequencies can be output separately.
5.Delay Control
function in the PA applications, esp. in the large size concert environment.
6.Low Output Gain Control
This control is used to attenuate or boost the low frequencies output by 6dB.
7.Phase Inversion for Low Output
This button will reverse the phase of the low frequencies output by 180 , so that, the low frequencies cancellation
in some fields can be compensated for.
8.Mute for Low Output
This button mutes the low frequencies output.
9.Mid Output Gain Control
This control is used to attenuate or boost the middle frequencies output by 6dB.
10.Phase Inversion for Mid Output
cancellation in some fields can be compensated for.
11.Mute for Mid Output
This button mutes the middle frequencies' output.
12.High Output Gain Control
This control is used to attenuate or boost the high frequencies output by 6dB.
13.Phase Inversion for High Output
lation in some fields can be compensated for.
14.Mute for High Output
This button mutes the high frequencies output.
15.CD Horn
power loss of it during the long distance transmission can be compensated for.
30.Threshold Setting
33.Stereo Mode Indicator
To prevent any damage to your speakers effectively, set the threshold of the multi-band limiter at the proper
position.
This LED lights up when the operation is selected in stereo mode.
31.Limiter Control
Engage this button to activate each band's limiter.
b. The Rear Panel
8
9
10
12
13
14
3
4
11
7
2.Low Cut
Engage this button to add a 25Hz low cut filter into the input signal path.
5
6
This knob adjusts the Low/Mid crossover frequency from 44Hz to 930Hz, based on which, the Low/Mid
frequencies can be output separately.
This knob adjusts the Mid/High crossover frequency from 440Hz to 9.3kHz, based on which, the Mid/ High
This knob adjusts the delay time from 0 to 2ms for the low frequencies output, which is proved to be a useful
This button will reverse the phase of the middle frequencies output by 180 , so that, the middle frequencies
This button will reverse the phase of the high frequencies output by 180 , so that, the high frequencies cancel-
Abbreviation for 'Constant Directivity Horn', this button can be used to boost the high frequencies, so that the
HIGH
NOT USED
LOW
LOW/HIGH
INPUT
NOT
VALID
MONO
4-WAY
NORMAL
SUMMED
LOW SUM
LOW SUM
HIGH
MID
LOW
LOW/MID
INPUT
HIGH
MID
INPUT
LOW/LF SUM
LOW/MID
HIGH
NOT USED
LOW/LF SUM
INPUT
LOW/HIGH
XOVER FREQ.
10
1
XOVER FREQ.
10
1
MODE
LF SUM
HIGH
HIGH-MID
NOT USED
NOT USED
NOT USED
NOT USED
LOW
LOW-MID
INPUT
LOW/LOW-MID
MONO
4-WAY
STEREO
3-WAY
STEREO
2-WAY
2
1
3
NEW
TIDE
2
1
3
NEW
TIDE
110-120V
220-240V
STEREO 2-WAY
MONO 4-WAY
AC INPUT
95-120V
/210-240V
60-50Hz
Rated Power Consumption 17W
FUSE:
210-240V: T250mAL 250VAC
95-120V: 500mA 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
Apparaten skall anslutas till
jordat uttag nar den ansluts
till ett natverk
A101