5. APPLICATION
5.1 X23SW 2-Way Stereo
system as the following illustration step by step:
1. Plug the Left line-in into INPUT 1 and the Right line-in into INPUT 2.
2. Connect the LOW OUT 1 to the Left input of the Low frequency amplifier, and the LOW OUT 2 to the
Right input of the Low frequency amplifier.
3. Connect the HIGH OUT 1 to the Left input of the High frequency amplifier, and the HIGH OUT 2 to the
Right input of the High frequency amplifier.
4. Connect the SUB woofer OUTPUT TO the subwoofer amplifier via this unbalanced 1/4" output jack.
Present your X23SW Active Crossover in a 2-way stereo application, please connect the unit in your
4.3. Rack Mounting
The most secure mounting is on a universal rack shelf available from various rack manufactures or your
music dealer. The X23SW Active Crossover fits into one standard 19" rack unit of space. Please allow at
least an additional 4" depth for the connectors on the rear panel. Be sure that there is enough air space
around the unit for sufficient ventilation and please do not place the X23SW Active Crossover on high
tem
devices such as power amplifiers etc. to avoid overheating.
perature
7
TYPICAL SET-UP
HIGH AMP
LOW AMP
SUB AMP
CHANNEL 2
CHANNEL 1
HIGH OUT 2
LOW OUT 2
INPUT 2(UNBALANCED)
INPUT 2(BALANCED)
HIGH OUT 1
LOW OUT 1
INPUT 1(UNBALANCED)
INPUT 1(BALANCED)
SUB
WOOFER
AC INPUT
95-120V
/210-240V
60-50Hz
Rated Power Consumption 6W
FUSE:
210-240V: T100mAL 250VAC
95-120V: 200mA 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
Apparaten skall anslutas till
jordat uttag nar den ansluts
till ett natverk
110-120V
220-240V
