16
Roof Felting
Take the roll of roof felt (grit side down) and roll it out somewhere flat and clean, e.g. a garage floor.
Also it is a good idea to have a sheet of ply or something similar to slide under the felt to protect the
floor when cutting. Use a utility knife to cut. Use a straight edge to get a much neater cut.
Once cut to length, roll the felt back up and transport to the roof to avoid the felt tearing and
therefore the roof leaking. The felt can then be rolled out in position on the roof. Diagram 29 shows
the felt layout from above the roof. Diagram 29 and 30 shows the pieces needed to be cut for the
Fairford 77 and 88 respectively.
9
7 x 7 Fairford
8 x 8 Fairford
Diagram 29
1000mm
3800mm
3300mm
3000mm
1
2
5
6
6
5
2
1
3
2
1
1000mm
3300mm
1
2
3400mm
3
Diagram 28
Diagram 30
4
4
2100mm
7 x 7 Fairford
8 x 8 Fairford
Summary of Contents for ABCEDCOR77
Page 1: ...12 19 FAIRFORD FAIRFORD 77 88 Fairford 77 Example...
Page 30: ...30 Notes...
Page 31: ...31 Notes...