DO NOT fix a plate any lower than 333mm from
the eaves as this will impair the ventaccess
operation.
NOTE 2:
Be sure that the bracket which secures
the partition to the roof sections will NOT
interfere with the high level shelving fixtures. (See
page 28). We suggest that the bracket is fixed
approximately 10” / 254mm from the side panel.
NOTE 3:
Remove eave bracket. When partition is
in final position refix the bracket
Fix the door by holding the door in position - so
that the door fits comfortably at the top and sides
- and mark screw holes.
Fix one 1
1
/
4
”/32mm csk screw in each hinge and
test fit. Adjust if necessary. Once door is to your
satisfaction secure with all screws.
Nail the angled cut door surround to top of door
frame. The side surrounds are already fitted.
Position and mark door lock and handle. Drill
suitable sized hole for the door spindle. Place and
fix using 6 black round headed screws. See fig 6
PARTITION
page 12
OPTIONAL
fig 5
Partition assembly
fig 6
Summary of Contents for Amateur 8'0" x 10'6"
Page 31: ...page 31...
