page 24
fig 4
VENTILATION
Ventilator Options
If you have not ordered an Automatic Opener as
an optional extra we supply a casement stay for
each roof vent.
With the roof vent closed fix the casement stay
centrally to the roof vent with 2 off
3
/
4
”/ 19mm
countersunk screws as shown in fig 2.
Locate the positions of the two studs with
reference to the casement stay. Note the position
of the ‘offset stud’ and the ‘central stud’ from fig
3. When your happy they are in the correct
position fix with
3
/
4
”/ 19mm countersunk screws.
We do not supply a casement stay when an
Automatic Opener is supplied.
To fix an Automatic Opener refer to fig 4 plus the
separate instructions supplied with the unit.
To be able to open the ventaccess, refer to fig 5
and fix a 1
1
/
4
”/ 32mm round head screw centrally
in the timber bar, so that about
1
/
2
” / 12mm is left
showing. (If the screw is put in too far it will not
hold the handle, also it will come through the
timber bar). Repeat above to each of the lift up
side vents. Fit the spring to the vent handle and fit
the handle to the clip.
fig 1
see fig 2
,
3 & 4
see
fig 5
fig 2
fig 5
Offset Stud
Central Stud
fig 3
Summary of Contents for Amateur 8'0" x 10'6"
Page 31: ...page 31...
