20
Door Installation
10
EV0110
EV0110
Diagram 44
Internal
Standing on the inside of the greenhouse, with
the door in the closed position you can install
the door frame sides (diagram 43). Secure
these with four 40mm screws per side. These
should be fitted as close to the door as
possible while still allowing it to pass by freely.
Dia. 45
You can now install the
rebate strips to the inside of
your door. Pilot hole the
strips first. It is best to do
this away from the
greenhouse with the 2
strips pinched together so
you get the holes in the
same positions. Drill 4 holes
equally spaced then fix
these with 40mm screws.
Internal
40mm Screw
Diagram 45
Top View
EV0105
EV0106
Summary of Contents for EVOLUTION EIGHT
Page 1: ...06 13...
