27
Dia. 30
9
Install the rear glass in the same method as
the side glass, the only difference is you have
to stack the shaped panes on top using the
glass separators. Make sure you have all the
glass to hand when you are glazing this
section. It is also a good idea to have an extra
pair of hands to hold glass in place while you
get the next section of glass in place. Always
keep the glazing capping flush to the
aluminium base level with the bottom of the
glass.
Once the vertical capping is on you can fit the
roof corner cloaking strips. These are handed
as they have glazing beads already attached
to them to secure the shaped panes along
the top edge, so make sure you have the
correct one (see page 28 for a guide).
Glazing
40m
m Sc
rew
EV
00
55
Glass retaining
bead
Diagram 30
EV
00
55
Eaves Bar
External
External
