- 4 -
HubWay8D / HubWay16D Installation Guide
1
2
3
4
CH 1-4
CH 5-8
28VAC
OFF
24VAC
+ DATA -
1-8
+ DATA -
9-16
5
6
7
8
9
10
11
12
CH 9-12
28VAC
OFF
24VAC
13
14
15
16
CH 13-16
AC POWER
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
OFF
RESET
1a - Channels 1-8 (HubWay8D) or
Channels 1-16 (HubWay16D):
CAT-5 or higher structured cable to Video/
Balun Combiners at cameras 1-8 or 1-16.
When using an optional HubSat4D any of
the outputs can be utilized for the data
transmission to PTZ’s.
1d - Output voltage switches:
Selects 24VAC/28VAC/OFF
for each output.
1b - Channels 1-4, Channels 5-8, Channels 9-12 & Channels 13-16:
CAT-5 or higher structured cable from optional HubSat4D enables video
transmission from up to four (4) cameras.
1g - IEC 320 Connector:
115VAC, 60Hz / 230VAC, 50/60Hz
(grounded line cord included).
Fig. 1
1e - Data:
Removable terminal blocks for RS422/
RS485 input from head end
equipment (DVR) for PTZ control.
+
--
Data input from
Head End
Equipment (DVR).
Top View
1c - LED(s) 1-16:
Power indicators.
1f - BNC Connector:
Video outputs to head end
equipment (DVR).
Front
Rear
