NetWayG
- 5 -
Fig. 3 - NetWayXTG
Installing a NetWayXTG Repeater Module:
NetWayXTG will work with PoE/PoE+ devices .
NetWayXTG is not intended to be connected to outside plant leads .
1 . Mount NetWayXTG in desired location utilizing the mounting hole (Fig. 3a, pg. 5) .
Use a proper fastener and/or wall anchor when securing NetWayXTG to the wall .
2 . Connect structured cable from port marked [OUT] on NetWayG to port marked [IN]
on the NetWayXTG (Fig. 3b, pg. 5) .
3 . Connect structured cable from port marked [OUT] on NetWayXTG to the PoE camera/ device or next
NetWayXTG repeater (Fig. 3b, pg. 5, Fig. 4, pg. 6 ) .
4 . Port status LEDs will illuminate on NetWayXTG indicating the port is operational
(Fig. 3a, pg. 5, refer to Port LED definitions below) .
Port LED Definitions for NetWayXTG Repeater:
Status
PoE/PoE+ Output LED
Green LED
Yellow LED
OFF
No PoE/PoE+ Output
Indicates no link .
Indicates no link
ON
Normal PoE/PoE+ Output
Indicates 1G link
Indicates 10/100 link
Blinking
–
Indicates 1G activity
Indicates 10/100 activity
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be
of sufficient magnitude to constitute an electric shock .
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying
the appliance .
CAUTION: To reduce the risk of electric shock do not open
enclosure . There are no user serviceable parts inside .
Refer servicing to qualified service personnel .
PoE/PoE+
Output
LED
Structured
Cable to
PoE/PoE+
Camera/Device or
next NetWayXTG
Port Status
LEDs
PoE/PoE+
Input
LED
NetwayXTG
Repeater
IN
OUT
PoE/PoE+
Output
PoE/PoE+
Input
www.altronix.com
Made in U.S.A.
Structured Cable from
Midspan or Endspan
(10/100/1000)