background image

 

Tango8P(CB) - PoE Driven Multi-Output Power Supply 

- 3 -

Overview:

Altronix Tango8P(CB) PoE Driven Multi-Output Power Supply converts an IEEE802 .3bt PoE input into eight 
(8) regulated 24VDC and/or 12VDC outputs up to 75W . It eliminates the need for a high voltage inside the 
enclosure . Tango8P(CB) is designed to support a single 12V LiFePO4 (Lithium Iron Phosphate) battery for 

12VDC and 24VDC backup .

Specifications:

Stand-by Specifications:

Battery

Access Control Applications Stand-by

4AH

30 Mins .

7AH

45 Mins .

12AH

1 .5 Hours

Ethernet Input:

•  802 .3bt PoE up to 90W or 802 .3at up to 30W

  or 802 .3af up to 15W .

Power Output 

(when using 802.3bt 90W)

:

•  12VDC up to 6 .25A (75W)

  and/or 24VDC up to 3A (75W) .

  Combined output not to exceed 75W .

• 

When charging batteries:

  12VDC up to 5 .4A (65W) 

  and/or 24VDC up to 2 .7A (65W)

  Combined output not to exceed 65W .

• 

Tango8P: Fuse protected outputs rated @ 3A

  per output, non power-limited . 

 

Tango8PCB: PTC protected outputs rated @ 2A 

  per output, Class 2 power-limited .

•  Any of the eight (8) fuse/PTC protected power 

  outputs are selectable to follow power Input 1 or 

  Input 2 . Output voltage of each output is the same 

  as the input voltage of the input selected . 

•  Individual outputs may be set to OFF position 

  for servicing .
•  Surge suppression .

Fuse/PTC Ratings:

•  Main input fuses rated @ 10A/32V each .

• 

PDS8: output fuses rated @ 3A/32V each .

• 

PDS8CB: output PTCs rated @ 2A each .

• 

TANGO1B: battery fuse rated @ 10A/32V each .

Ethernet Output 

(Tango1B)

:

• Pass-through Ethernet Port (data only) .

• 100/1G .

Battery 

(Tango1B)

:

•  12VDC battery charger for Lithium Iron

  Phosphate Battery (LiFeP04 only) .

Battery

 (cont’d) (Tango1B)

:

•  Unique technology allows for single battery

  to backup 12VDC and/or 24VDC systems .

•  Low power shutdown . Shuts down DC output 

  terminals if battery voltage drops below 80% of 

  nominal . Prevents deep battery discharge . 

Supervision:

•  Loss of PoE Input .

•  Battery Supervision .

Visual Indicators:

• 

Tango1B

 - Input indicates input voltage is present .

 - Battery status indicates battery trouble condition .

  -  PoE Class indicator .

  -  Supervision PoE Fail or BAT Fail .

• 

PDS8(CB)

 - Individual voltage LEDs indicate

    12VDC (Green) or 24VDC (Green and Red) .

Environmental:

•  Operating temperature: 0ºC to 49ºC ambient .

•  Humidity: 20 to 85%, non-condensing .

Enclosure Dimensions 

(approximate H x W x D)

:

  15 .5” x 12 .25” x 4 .5” (394mm x 311mm x 114mm) .

Accessories:
Power Sourcing Equipment

 

NetWay1BT - Single Port Managed Hi-PoE

  Injector supplies 90W total power .

 

NetWaySP1BT - 802 .3bt Media Converter/

 Injector supplies 90W total power .

 

NetWay4BT - 4-Port Managed Hi-PoE

  Midspan Injector supplies 480W total power .

 

NetWay8BT - 8-Port Managed Hi-PoE

  Midspan Injector supplies 480W total power .

Summary of Contents for Tango Series









Reviews: