Trove2PX2 / TPX2 Installation Guide
- 3 -
TPX2: Configuration of Altronix Power Supply
and/or Sub-Assembly Boards and Paxton Net2 Plus Modules
1. Fasten spacers (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards
(Fig. 2, pg. 3)
. Fasten metal spacers in the correct locations to provide proper grounding, see below
(Fig. 2, pg. 3)
.
Note:
Each Altronix sub-assembly position can accommodate one (1) ACM8/ACM8CB, PD4UL/PD4ULCB, PD8UL/PD8ULCB, MOM5,
PDS8(CB) or VR6.
2. Mount boards to spacers utilizing 5/16” pan head screws (provided)
(Fig. 2, 2a, pg. 2)
.
3. Mount Paxton Net2 Plus modules into the correct positions
(Fig. 2, pg. 2)
.
Note:
Paxton Net2 Plus modules have one (1) RJ45 jack and one (1) switch each.
Please make sure that they are mounted correctly, as shown in
Fig. 2
below
4. Fasten TPX2 backplane to Trove2 enclosure utilizing pan head screws (provided).
Fig. 2 -
Trove2PX2/TPX2 Configurations
Pem
Spacer
Power Supply or
Sub-Assembly
Backplane
Pan Head
Screw
Metal
Spacer
Placement
Altronix
Power
Supply
Metal
Spacer
Placement
Altronix
Power
Supply
or
Sub-Assembly
Altronix
Sub-Assembly
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
RJ45 Jack
Switch
Fig. 2a
