Altronix TROVE TC1, Installation Manual

Trove / CDVI 

- 3 - 

Spacer

CDVI - A22K/A22NB

/ADH10

Access Controller

Backplane

Fig. 2b

TC1: Configuration of Altronix Power Supply

and/or Sub-Assembly Boards and CDVI Modules

1.  Fasten spacers (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards 
 

(Fig. 2, pg. 3). Fasten metal spacers in the correct locations to provide proper grounding, see below (Fig. 2, pg. 3).

2.  Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 2a, pg. 3).
3.  Mount appropriate CDVI A22K/A22NB/ADH10 modules into the correct positions (Fig. 2, pg. 3) by postioning spacers over 
 

appropriate holes on the backplane and depress down on board to secure spacer to the backplane (Fig. 2, 2b, 2c, pg. 3).

 Note:  CDVI A22K/A22NB/ADH10 modules have one (1) RJ45 jack each. 

Please make sure that they are mounted correctly, as shown in Fig. 2 below. 

4.  Fasten TC1 backplane to Trove1 enclosure utilizing pan head screws (provided).

Fig. 2 - Trove1C1/TC1 Configurations

Plastic Spacer

pre-mounted into

CDVI Atrium modules 

Insert into

TC1/TCV2/TCV3 backplane

Fig. 2c

Altronix

Power

Supply

Altronix

Sub-

Assembly

Metal

Spacer

Placement

RJ45 Jack

RJ45 Jack

RJ45 Jack

RJ45 Jack

RJ45 Jack

RJ45 Jack

CDVI

A22K/A22NB/ADH10

CDVI

A22K/A22NB/ADH10

CDVI

A22K/A22NB/ADH10

CDVI

A22K/A22NB/ADH10

CDVI

A22K/A22NB/ADH10

CDVI

A22K/A22NB/ADH10

Pem

Spacer

Altronix

Power Supply or 

Sub-Assembly

Backplane

Pan Head

Screw

Fig. 2a