- 2 -
Vertiline3D/VertiLine6D
Overview:
Altronix Vertiline Rack Mount Power Supplies provide eight (8) filtered and electronically regulated power outputs in a
space saving 1U EIA 19” rack mount chassis. The units are available with either 12VDC or 24VDC power outputs.
Vertiline Rack Mount Power Supplies are also available in sixteen (16) outputs.
Eight (8) Output Rack Mount Configuration Reference Chart:
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or
moisture. This installation should be made by qualified service personnel and should conform to
all local codes and in accordance with the National Electrical Code.
Installation Instructions:
1. Attach mounting brackets to Vertiline unit for desired rack or wall mount installation
(Figs. 3-4, pg. 7)
.
Affix rubber pads to Vertiline for shelf installation
(Fig. 5, pg. 7)
.
2. Secure the unit into rack, mount unit to wall or place unit on a shelf as desired (unit should be spaced at least
3” from any video monitors). When installing the unit in a rack allow for one half U spacing above the unit
for ventilation.
3. Insert and secure removable terminal blocks to unit
(Fig. 1e, pg. 4)
.
4. Plug the grounded AC line cord (included) into the IEC 320 connector of the Vertiline unit
(Fig. 1d, pg. 4)
.
Insert the plug end of the line cord into a grounded AC, receptacle.
5. Set illuminated master power disconnect circuit breaker to the (ON) position
(Fig. 1c, pg. 4)
.
6. Measure output voltage before connecting devices. This helps avoid potential damage.
7. Set illuminated master power disconnect circuit breaker to the (OFF) position
(Fig. 1c, pg. 4)
.
8. Connect the power output of terminals marked [+ 1 --- ] to the power input of device
(Fig. 1b, pg. 4)
.
Repeat this step for each additional device (Outputs 2-8).
9. Upon completion of wiring, set illuminated master power disconnect circuit breaker to the
ON (RESET) position
(Fig. 1c, pg. 4)
.
• 115VAC 60 Hz input.
• Eight (8) power LED indicators.
• PTC protected outputs.
• Filtered and electronically regulated.
• Illuminated power disconnect circuit breaker with
manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Removable terminal blocks with locking screw flange.
• Ease of installation saves time and eliminates costly labor.
• Compact 1U rack mount chassis.
• Fits standard EIA 19” rack.
• Units can be rack, wall or shelf mounted.
Altronix
Model
Number
Vertiline3D
12VDC
8 amp
8
PTC
2.5 amp
1.5 amp
Vertiline6D
24VDC
8 amp
8
PTC
2.5 amp
3 amp
Total Output Cur
rent (P
ow
er)
Output
V
oltage (V
A
C)
Number of Outputs
PTC Output Protection
Cur
rent
(max. per output)
115V
A
C 60Hz
Input Cur
rent
Agenc
y Listings
VertiLine3D:
• Eight (8) 12VDC power outputs.
VertiLine6D:
• Eight (8) 24VDC power outputs.
VertiLine Specifications:
Common Specifications:
