1. Turn both the camera and receiver OFF.
2. Mount the receiver to the camera’s hot shoe socket. Connect the shutter release cable
to the ACC2 socket of the receiver and to the remote socket on the camera body.
3. Set the channel switches to the same combination on both the receiver and transmitter.
(When using several camera units, make sure all receivers are set to the same channel
settings.)
4. Turn the camera ON and switch the receiver to “Camera” mode.
5. Press the button on the transmitter to confirm interaction.
6. Half press the transmitter’s button for autofocus and fully press for shutter release.
7. If the transmitter and receiver status lights turn red while the flash trigger light turns on, all
settings are correct.
10
