Chapter 3. Basic Operation
21
4. Reach underneath and pull the keyboard module all the way out until it
clicks into place.
Opening Together
Refer to the diagrams in the
Opening Separately
section as you do the
following:
1. Pull the release catch and pull the top and bottom panels out until the key-
board module clicks into place. (Once the console has been released, you
can let go of the release catch.)
2. Pull the bottom panel all the way out until it clicks into place.
3. Pull the top panel the rest of the way out until it clicks into place.
4. Rotate the top panel all the way up to expose the LCD screen.
Note:
Refer to the warning regarding placing excessive weight on the
keyboard module on the following page.
kl3116-3116t.book Page 21 Wednesday, June 1, 2011 1:28 PM
