Chapter 5. Hotkey Operation
51
Skip Mode
This feature allows you to switch between computers in order to monitor them
manually. You can dwell on a particular port for as long or as little as you like
– as opposed to auto scanning, which automatically switches after a fixed
interval. To invoke
Skip
mode, key in the following hotkey combination:
1. Invoke hotkey mode (see page 48).
2. Key in
[Arrow]
Where [Arrow] refers to one of the arrow keys. After you press an
arrow, you automatically exit hotkey mode and enter
Skip
mode where
you can switch ports as follows:
Once you are in Skip Mode, you can keep on skipping by pressing the
arrow keys. You don't have to invoke hotkey
mode again.
While Skip Mode is in effect, ordinary keyboard and mouse functions
are suspended – only Skip Mode compliant keystrokes can be input.
You must exit Skip Mode in order to regain normal control of the
console.
3. To exit
Skip
mode, press
[Esc]
or
[Spacebar]
.
←
Skips to the first accessible port. (See
page 37, for information regarding accessible ports.)
→
Skips to the next accessible port.
↑
Skips to the last accessible port of the previous station.
↓
Skips to the first accessible port of the next station.
kl3116-3116t.book Page 51 Wednesday, June 1, 2011 1:28 PM
