20
my-netti.com
Model:
NettI 4U CE
Language:
English
Version:
2017-06
Adjusting the calf
support
the calf support is
height and depth
adjustable.
to adjust the height
unfix the nut on the
outside of the calf
support bracket, find
the required height
and fix the nut again
(a) 10 mm open-end
spanner.
Calf pad depth adjustment:
to adjust in depth, the calf pad is
removed from the bracket by using an
open-end spanner between the pad and
the bracket. find the required position
and refix it.
13 mm open-end spanner
never stand on the foot plates!
never lift the wheelchair by the
leg supports.
6.10 HEAD SUPPorT
a - lever for depth adjustment
B - Wheel for angle adjustment
c - lever for height adjustment
D - Head support bracket
fixing the head support:
•
Place the squared nut in the slot in the
head support bracket as shown above and
screw the lever for height adjustment into it.
•
Place the head support in the head
support bracket.
•
the height and the depth of the head
support is set to the required positions and
tightened.
Adjusting the head support depth:
•
release the locking lever on top of the
vertical bar (a).
•
adjust the head support and fix it in
required position.
Adjusting the head support height:
•
release the lever for height adjustments on
the head support adapter (c).
•
adjust the head support and fix it in
required position.
Adjusting the head support angle:
•
release the adjustment wheel at the rear
of the horizontal bar (B).
•
adjust the head support and fix it in
required position.
Adjusting the head support sideways:
•
the head support adapter can be moved
both to the right and left, giving the
possibility to accommodate special needs
for head support.
•
loosen the four screws holding the adapter
together.
