my-netti.com
29
Model:
Netti 4U
CE
Language:
English
Version:
2017-06
Using a hoist:
Before transfer to chair:
•
tilt the chair back
•
remove the head support
•
remove the leg supports
•
open the back rest angle slightly
•
replace the components when transfer
is finished.
never stand on the foot plates
due to the risk of tipping the chair
forwards.
8.8 lIfTING THE WHEElCHAIr
•
the wheelchair should be lifted by the
frame, and push bow only.
•
lifting points are marked with this sign:
Never lift the wheelchair by the leg
supports or arm supports
Do not lift the wheelchair
with a user in it.
8.9 PUSH rIM
netti 4u ce is delivered with aluminium push
rims as standard. the material and distance
to the main wheel influences the ability of the
user to grip.
contact your dealer to get information about
alternative push rims that fit your chair.
alternative push rims may give a better
grip, but the friction may increase.
When using the hands to stop the
chair, the risk for burning of the hands
increases.
a squeezing and trapping hazard of the
fingers may occur when passing
through narrow passages and if
the fingers come between the spokes.
to avoid this risk, we recommend spoke
protectors as accessory.
if you want/need to change push rims
or increase/decrease the distance
between the push rims and the wheel,
please contact your dealer
