32
my-netti.com
Model:
NettI 4U CE
Language:
English
Version:
2017-06
10. maintenance
10.1 MAINTENANCE INSTrUCTIoNS
the netti chairs are built of modules. alu
rehab carries stock of all parts and is
ready to supply these on short notice.
necessary instructions for mounting will
follow the parts.
Parts to be handled by users are defined
in spare part catalogues that can be
downloaded at www.my-netti.com. these
parts can, if needed, also be removed and
sent to manufacturer/distributor upon
request.
Parts related to wheel frame construction
must be handled by manufacturer or
authorized service facility.
if defects or damages occur,
please contact your dealer.
check/re-adjust screws and nuts
at regular intervals.
sand and sea water (salt used for
gritting in the winter) can damage
the bearings of the front castors
and main wheels. clean the
wheelchair thoroughly after use.
You can order original paint from
alu rehab to repair scratches and
minor damages to the paint:
Please contact your dealer to order.
as a rule of thumb, use oil on movable
parts and all bearings. alu rehab
recommends use of ordinary bicycle oil.
frequency
Weekly Monthly
check defects/damages
e.g. breakage/missing parts
X
Washing of wheelchair
X
oiling of bearing*
X
Washing of cushions
X
check anti tip function
X
check brake adjust-
ment
X
check function of Qr-
axels - see chapter 6.2
X
check tyre wear
X
10.2 ClEANING AND WASHING
1. remove seat cushion before washing
the wheelchair.
2. clean cushion and cover according to
instructions printed on cushions.
Cushion cleaning procedures:
CorE
Washing
Hand wash 40ºc
Disinfection
Virkon s
autoclave 105ºc
Drying
squeeze
air dry standing edgewise
outer coVer
Washing
machine wash 60ºc
Drying
tumble dry max 85ºc
3. clean frame using water and a rag.
4. We recommend using soft soap.
5. rinse the wheelchair well using clean
water to remove all the soap.
6. use methylated spirit to remove any dirt
7.
Disinfection
: use a soft rag wetted with
Hydrogen peroxide or technical spiritus
and wipe the whole chair clean.